Archive for August 3rd, 2010
Posted Monday, April 30th, 2012 by admin
The Auto Locksmith has just committed to posting at least one new blog per day. All blog posts will be synched with Facebook and Twitter.
The first new post will be delivered tomorrow
Posted Sunday, June 19th, 2011 by admin
Auto Locksmiths could soon be looking for a new job if this one catches on!
A California company Tuesday will announce an iPhone application and car receiver that will enable users to lock, unlock and remotely start their car with the phone rather than the car’s key fob.
The system — which works on any car with electric windows and locks, but does not require an existing remote start feature — includes a receiver that is installed in the car. It’s going on sale at Best Buy stores for $499.
Our verdict? This opens up a huge hole for hackers and car thieves and proves a potential security risk. You may never lose your car keys again, but you may find your car is missing instead, so steer clear of this crazy idea.
Posted Friday, October 01st, 2010 by admin
Following on from our previous post “How to program a Ford key fob” we now explain the programming method for the Transit van.
Ford Transits and the Transit Connect van operate with separate square remote fob.
The remote utilises three buttons
1) Lock
2) Unlock
3) Unlock back and side door independently
Pressing the lock button twice will double lock the vehicle and set the deadlock. This is an extra security measure meaning the vehicle will not open when the handle is pulled from the inside.
Whilst the Transit van is supplied with a separate fob it is possible to program a key with a built in fob like the the Ford Focus.
The key used to start the vehicle can only be programmed with a diagnostic tool. If you require a replacement Ford key take a look at our Ford key section here http://www.theautolocksmith.co.uk/Ford-car-keys.html
The remote can be programmed with no specialist tools utilising a manual procedure as follows:
- Insert a programmed key into the ignition
- Turn the key from the off to on position 8 times
- You will hear the vehicles locks cycle
- Press any button on the remote
- Again you will hear the locks cycle
- Turn the key to the off position and remove from the ignition
- Wait 10 seconds and test the remote
- Job done!!
We can supply and program Ford remotes at your vehicle. If you need a Ford key or remote why not give us a call… We are cheaper than Ford main dealers and save you the hassle of loosing your car for 2 hours whilst in their workshop.
